How to fix a bent USB cable?

USB stands for Universal Serial Bus and is the standard for technical connectivity. Most use the same port and terminal - mostly. There are some changes to the USB connector, but this is subject to change. Many countries are legislating that companies can only use the USB Type-C style. The rules are designed to prevent businesses from forcing customers to buy new cables every time they buy equipment, and to reduce the waste involved.

You can even use a USB Type-C cable to charge your smartphone or laptop, which means you may still have trouble with glitches. One of the biggest causes of this problem is that the cable is bent too stiffly and repeatedly. Frequent flexing can cause internal wiring to lose power or break completely. Oupiin understands this frustration and would like to provide information on how to avoid this problem.

Reasons for a bent USB cable

A bent USB cable can be annoying, especially if it's the only one you have. You might be using it to charge your smartphone or need it for a product you're building, making it even more annoying. Using a high-quality cable can prolong this complication so as not to ruin your day, but you could be hurting it unknowingly. This is why certain actions should be avoided when using these components.

For example, we recommend gently pulling the cable out of its plug. Don't just pull on the cable until it pops out, as this can damage the internal wiring and ports. The port can even break off and cause the connector to get stuck inside the terminal. Instead, you should pull it out of the base - the small rectangle at the end of the rope. Pulling the plug carefully will ensure that no debilitating weight is imposed on its weakness, which will hasten its demise. Pulling it carefully out of the correct position also avoids violent twisting or turning. This recklessness is actually the number one cause of USB cable failure. Accidentally bent.

When these cables are bent too often and into less sympathetic positions, the internal wires will lose power or snap completely. This dilemma can cause the covering around the wires to disappear, leaving the internal wiring vulnerable to external hazards. Many users are aware of the dilemma when the connection is constantly "lost". We've all dealt with this situation; the cable has to be placed at a certain angle, and only at that angle, or it won't work. You continue to charge your phone alone while you sleep or work, thinking it will fill up with the necessary energy, but when you look away, it moves a millimeter to the left and stops giving your device the energy it needs to thrive . That means you have to go to work or school with your dead shell. You can't call other colleagues or clients, miss important messages from friends and family, or be ignorant of what's going on around the world. Thankfully, there is a solution to this twisted USB cable problem.

Fix bent USB cable

Unfortunately, fixing a bent USB cable can be a bit complicated and requires neat precision. You will need a cutter, spare USB connectors, wire strippers, and solder. First, you'll need to cut off the damaged part and snip off half an inch behind it. To do this, you'll use scissors to separate the broken section from the work surface, leaving two sections. Once you've done this, you'll cut off the area that caused this failure. Then you'll need to strip off an inch of tape covering the wires on the working half and the breakaway section. You just wrap the severed cable and stripped working parts together. If two wires separated from each other are available, you will either solder the two parts or twist them tightly together even after cutting the broken part of the cable. Soldering ensures they are connected but not unraveled. Finally, cover it with electrical tape so it's less vulnerable and relatively protected. After completing these steps, the cable should start working like new.

However, if the faulty cable you cut is too damaged, you'll need to find a replacement USB connector. This replacement will be merged with the end of the work cable with some soldering. You will need to solder the replacement to the usable part of the feature wire. You'll also need to make sure you're using a replacement that matches the size of the damaged cable, or all this work will be in vain. Thankfully, many places that offer USB connectors have all the specs on their specific pages. If you really need another USB connector, look no further. Oupiin offers all the equipment you need at an affordable price.

Request a USB sample kit from Oupiin Enterprise!